Muhammad NaeemThe NZXT H5 Flow price in Pakistan starts at Rs. 29,400 at the time of checking, and the first thing a buyer here needs to know is which H5 Flow that money actually buys. NZXT sells two different cases under this name. The original H5 Flow (model CC-H51FB-01 in black, launched in 2022) is the one Pakistani sellers stock, with a 280 mm front radiator limit and 365 mm of GPU clearance. The newer H5 Flow refresh from 2024 (model CC-H52FB-01) is a slightly different chassis with 360 mm front radiator support and 410 mm of GPU room, and at the time of checking it was not commonly listed by local sellers. Almost every local listing below describes the 2022 case, even where a shop has pasted a line or two from the newer product page, so confirm the model number on the box before you pay.
NZXT H5 Flow Prices From Sellers in Pakistan
Stock of this case is thin in Pakistan right now. Three of the four listings we checked were sold out or order only, and the warranties on offer are checking warranties rather than a full local replacement cover, so ask the seller to confirm availability and warranty terms on a call before transferring any money.
| Seller | Exact Variant | Condition | Warranty / Stock Note | Price |
| TechMatched (Islamabad) | NZXT H5 Flow Compact ATX Mid-Tower, Black (2022 model) | New | Sold out at last check, check warranty only | Rs. 29,400 |
| BuyersPK (Lahore) | NZXT H5 Flow Compact ATX Mid-Tower (2022 model) | New | Listed at 0 items in stock at last check, confirm before ordering | Rs. 29,500 |
| IndusTech | NZXT H5 Flow Compact ATX Mid-Tower, Black | New | On order only, checking warranty | Rs. 32,500 |
| RB Tech and Games (Lahore) | NZXT H5 Flow Mid-Tower, Matte Black (2022 model) | New | Out of stock at last check | Rs. 32,500 |
Used H5 Flow cases show up on OLX and Facebook groups from time to time, usually when someone is upgrading to a bigger chassis. A fair used price depends on the glass panel being scratch free and both original F120Q fans still running quietly, so inspect in person where you can.
NZXT H5 Flow (2022) Specifications
These specifications are for the original 2022 H5 Flow that Pakistani sellers stock. Where the 2024 refresh differs, the second table below spells it out so you can tell the two cases apart in a listing.
| Model | NZXT H5 Flow (2022), CC-H51FB-01 Black / CC-H51FW-01 White |
| Case Type | Compact ATX mid-tower |
| Dimensions (H x W x D) | 464 x 227 x 446 mm |
| Weight | 7.01 kg |
| Materials | SGCC steel, tempered glass side panel (dark tint on black, ultra clear on white) |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Included Fans | 2 x F120Q 120 mm (1 x rear, 1 x angled bottom GPU fan) |
| Fan Support | Front 2 x 120 mm / 2 x 140 mm, Top 2 x 120 mm, Rear 1 x 120 mm, Bottom 1 x 120 mm |
| Radiator Support | Front up to 280 mm, Top up to 240 mm, Rear up to 120 mm |
| GPU Clearance | Up to 365 mm |
| CPU Cooler Clearance | Up to 165 mm |
| PSU Support | ATX, bottom mounted (allow extra care with long units when a front fan is fitted) |
| Drive Bays | 2 x 2.5 inch, 1 x 3.5 inch |
| Expansion Slots | 7 |
| Front I/O | 1 x USB 3.2 Gen 1 Type-A, 1 x USB 3.2 Gen 2 Type-C, 1 x headset audio jack |
| Cable Management | Up to 23 mm depth, wide channels with hooks, bridges and straps |
| Warranty | 2 years (NZXT international terms, local cover varies by seller) |
The 2024 refresh changes several of those numbers. It measures 465 x 225 x 430 mm, widens motherboard support to E-ATX up to 277 mm, stretches GPU clearance to 410 mm and CPU cooler clearance to 170 mm, allows a PSU up to 200 mm long, and raises front radiator support to 360 mm with a faster USB 3.2 Gen 2×2 Type-C port at 20 Gbps. If a seller quotes you those figures for a case sitting in a Karachi or Lahore warehouse, ask for the model number in writing, because the box in front of them is most likely the 2022 version. You can compare both generations on the official NZXT H5 Flow product page, which now covers the current refresh.
Cooling, Build Quality And Who Should Buy It
The H5 Flow built its name on one idea done well: a perforated front panel that actually lets air through, instead of the sealed glass fronts that were common when it launched. The angled 120 mm fan under the PSU shroud blows air straight at the graphics card, which helps in a chassis this compact, and the cable channels at the back are wide enough that a first time builder can get a tidy result without fighting the side panel. With 365 mm of GPU clearance on the 2022 model, mainstream cards fit comfortably, including the cards in our NVIDIA RTX 4060 price in Pakistan guide and most models covered in the AMD RX 7700 XT price in Pakistan guide. Measure a long triple fan card before ordering though, because the refresh figure of 410 mm does not apply to the stock you will find locally. The 165 mm cooler clearance takes most tower air coolers, and a 280 mm front AIO or 240 mm top AIO covers CPU cooling for a gaming build.
Buy the H5 Flow if you want a compact, clean looking airflow case from a known brand and your graphics card is under 365 mm long. Look elsewhere if you plan a 360 mm radiator, a very long flagship GPU, or an E-ATX board. Builders who want more radiator room and bigger stock fans for similar money should also read our Lian Li Lancool 216 price in Pakistan guide before deciding.
Variants, Colours And The Used Market
NZXT sells the 2022 H5 Flow in black and white, and both colours appear in Pakistani listings at the same headline price when stock exists. There is also an H5 Flow RGB variant with lit fans, which some importers bring in small numbers. Check the model code on the carton: CC-H51FB-01 is the black 2022 case, CC-H51FW-01 is white, and any CC-H52 code means the 2024 refresh. That one letter matters, because the two generations take different radiator sizes and offer different GPU clearance.
On the used market, a clean 2022 H5 Flow with both fans and an unmarked glass panel is a sensible buy for a budget build, since a case has no electronics to wear out beyond the fans. Check that the bottom GPU fan spins without grinding, that the front mesh is not dented, and that the original screws and cable straps are in the box. Avoid paying refresh money for a first generation case, and walk away from any unit with a cracked glass panel, because replacement panels are hard to source locally.
Should You Buy The NZXT H5 Flow In 2026?
At Rs. 29,400 to Rs. 32,500 the original H5 Flow is fairly priced for a branded airflow chassis in Pakistan, provided you go in knowing it is the 2022 model. It suits a mid range gaming PC with a card like the RTX 4060 very well. If a seller claims to have the 2024 refresh, get the CC-H52 model number confirmed on the invoice before paying, and if your build needs a 360 mm radiator today, the Lancool 216 is the easier case to cool.
- Perforated front panel gives real airflow in a compact footprint
- Angled bottom fan blows air directly at the graphics card
- Wide cable channels make a tidy build easy for beginners
- USB Type-C on the front panel, rare at this price when it launched
- Black and white versions listed at the same price locally
- Pakistani stock is the 2022 model, not the roomier 2024 refresh
- 365 mm GPU clearance rules out the longest triple fan cards
- Most local listings were sold out or order only at last check
- Local warranty is usually checking warranty only
Frequently Asked Questions
What is the NZXT H5 Flow price in Pakistan?
The NZXT H5 Flow price in Pakistan starts at Rs. 29,400 at TechMatched for the black 2022 model at the time of checking. BuyersPK lists the case at Rs. 29,500, while IndusTech and RB Tech and Games list it at Rs. 32,500, with most sellers showing sold out or order only status.
Is the H5 Flow sold in Pakistan the 2022 or the 2024 model?
Almost all Pakistani listings describe the original 2022 H5 Flow (model CC-H51FB-01), with 280 mm front radiator support and 365 mm GPU clearance. The 2024 refresh (CC-H52FB-01) adds 360 mm front radiator support and 410 mm GPU clearance but was not commonly listed locally at the time of checking. Always confirm the model number before paying.
Will an RTX 4060 or RX 7700 XT fit in the H5 Flow?
Yes. The 2022 case clears graphics cards up to 365 mm long, which covers the RTX 4060 and the great majority of RX 7700 XT models. Measure oversized triple fan variants against the 365 mm limit if your card is close to that length.
What radiators fit in the 2022 H5 Flow?
The 2022 model supports up to a 280 mm radiator in the front, 240 mm in the top and 120 mm at the rear. A 360 mm radiator does not fit this generation; that support arrived with the 2024 refresh.
Which motherboard sizes fit in the H5 Flow?
The 2022 case officially supports ATX, Micro-ATX and Mini-ITX boards. The 2024 refresh extends that to E-ATX boards up to 277 mm wide, which is another easy way to tell the two generations apart when a seller describes a unit.
Add comment